Setting the ASCII File Transfer Parameters
The following parameters can be set:
- Start of file transfer
- ~
a string that is sent before file
transfer starts.
- End of file transfer
- ~
a string that is sent when the
transfer finishes.
- Send
- ~
determines if the output
translation table is used for
sending files.
- Receive
- ~
determines if the input
translation table is used for
capturing files.
- Delay Time
- ~
sets the time [ms] UniTerm waits
after every character sent (this
is implemented with the 200Hz
system clock.
- Method
- ~
if <#3633#>[Paced by Echo]<#3633#> is selected, UniTerm
waits for every character sent
to be echoed (except ASCII control
codes), this doesn't time out!
- Translate EOL to
- ~
selects if
<#3646#>CR<#3646#>
<#3647#>LF<#3647#>
4.1is sent as
<#3648#>CR<#3648#>
<#3649#>LF<#3649#>
,
<#3650#>CR<#3650#>
,
<#3651#>LF<#3651#>
or as
<#3652#>SP<#3652#>
<#3653#>CR<#3653#>
. This
function will send single
<#3654#>CR<#3654#>
's and
<#3655#>LF<#3655#>
's correctly!
- Translation on input
- ~
allows you to change the translation
table used during file capture
- Translation on output
- ~
enables you to edit the
translation table which is used for
sending files, enter the
decimal ASCII values of the
characters or nothing if you
want the character to be ignored.